Direct modulation optical transmitter with SNMP management, indoor, 1550nm, 2 output port, 6mW(2x4) output optical power, 47~862MHz, SBS, AGC, imperial F type female port, FC/APC or SC/APC connector, RJ45 and RS232 port, VFD, 19" 1U. (8mW-2x6 and 10mW-2x10 are optional).
Direct modulation will lead to high laser chirp (Laser's bias current is modulated by signal and the optical spectrum shifts and shakes). Laser chip will interact with dispersion effect caused by standard single mode fiber (SMF-28), which will generate serious distortion in the place of 1550nm. This kind of distortion will become more serious with the increase of transmission distance, bandwidth and channel number.
At present, international high performance 1550nm direct modulation has no obvious performance inferior while transmitting an analog and digital multiplexing full channel signal with transmission distance≤15Km or transmitting digital load with transmission distance≤40Km.
ADK OT1550D is a 1550nm direct modulation optical transmitter with high index and AGC function. It adopts high linearity and low chirp DFB laser, built-in pre-distortion compensation and AGC, APC, ATC closed loop control, which improves the system index obviously. It can be used in FTTx (≤10Km) of second-grade service area (sub-headend), also can be used in WDM narrow-band multiplexing and IP/QAM.